Metrology for Industry Foundation Degree


Course Code



Coventry University (Coventry)


Study mode



2 years part-time

Start date

September 2022

Course overview

Study level: Undergraduate
Foundation Degree

In today's globally competitive marketplace, we believe that metrology plays a crucial part in the manufacturing process to ensure quality and efficiency. Getting it wrong can prove costly, as bad data can be disruptive to decision making and improvement planning. However, getting it right helps to manage risk and support quality management, continuous improvement and waste reduction activities that enhance productivity.

  • Developed in consultation with the National Physical Laboratory (NPL), Rolls-Royce Plc, Jaguar Land Rover, Airbus and other employers and stakeholders, this vocational entry course represents the world’s first foundation degree in metrology - the science of measurement.
  • Based around, but not exclusively on, the field of industrial dimensional metrology, this course aims to develop understanding of different measurement systems and metrology tools and techniques across manufacturing engineering, with its many supporting metrology service organisations.
  • The course is a part-time, work-based Industrial Metrology degree designed by industry, for industry.
  • Part-time block delivery is designed to link to work-based activity.
  • You must already be in a role that has access to measurement processes/planning or services.
globe decorative icon

Global Ready

An international outlook, with global opportunities

human silhouette teaching in front of a blackdoard

Teaching excellence

Taught by lecturers who are experts in their field

Resume icon displaying a paper and a pen


Career ready graduates, with the skills to succeed

Why you should study this course

Metrology is the science of measurement. Industrial metrology is the application of metrology within manufacturing and its supporting services. It is a keystone of manufacturing trade and productivity. No trade can take place without some form of measurement validation to say that the component part or batch of parts conform to design intent and specification.

Sustainable trade comes from supplying quality parts on time and for a competitive cost, therefore effective measurement is a key function in gaining confidence in data, driving productivity and so a pillar in supporting that business objective.

The aim of this unique course is to produce industrial metrologists that offer a lead to their organisations in relation to measurement issues and metrology planning. Gaining a deep understanding of industrial metrology planning and evaluation tools as well as the importance of metrology in driving productivity.

What you'll study

We aim to provide you with a solid foundation in the relevant underpinning theories and application of metrology within an industrial context including these core areas of industrial metrology:

  • Exploring knowledge around the maths, engineering science, standards and calibration.
  • Exploring skills and knowledge related to traditional and emerging measurement tools and techniques, including a variety of coordinate measuring systems and the technologies involved in modern measuring system sensors.
  • Utilisation of Metrology tools which could help to gain confidence in the data that any measurement collects. Tools such as Measuring System Analysis (includes Gauge Repeatability and Reproducibility) and Uncertainty analysis.

Drawing heavily on real-life experience, best practice examples and practical demonstrations, you should learn how to identify areas for improvement within your organisation and select the most appropriate measurement methods. For example, selection of equipment, strategies for measurement and managing risk.

In the first year you will develop an understanding and appreciation of:

  • The causes of measurement variation and their mitigation, measurement good practice and strategy.
  • The role of calibration and traceability and their place in international trade and measurement practices.
  • An understanding of the equipment types, strategies and idiosyncrasies within coordinate metrology equipment, underpinned by an understanding of the science and mathematics behind key equipment technologies.

These build a foundation of core skills and knowledge required in year 2.


  • This module will introduce you to the University, the course, and the tools we provide to help you complete your studies. We will look at academic study and how you can link this to your place of work so that you can input into your organisation whilst you learn.


  • We will show how metrology fits and can help productivity within industrial metrology, the organisations that support and underpin its processes and procedures and how metrology can effectively control measurement confidence within your manufacturing context.


  • From first principles of measurement to the latest measurement technology, mathematics plays a large role in the measurement numbers we see. Trigonometry, Geometry and Statistics all regularly play a role in measurement. We will build up your applied math’s to support understanding of metrology and measurement procedures and equipment.


  • We will show you how measurement results are affected by physics, and how by understanding the basic principles of engineering science, you can mitigate and understand uncertainties within a measurement process.


  • Core metrology up to the point of measurement is underpinned by a broad spectrum of standardised practices. Some of which are underpinned by legislation, government and international policy and requires managing and traceability of outcome, so that it can be audited and confirmed. The impact of this reaches into almost all companies who wish to trade and comply to supplier requirements. We will look at company quality management systems such as ISO9001 and the wider impact of standards, calibration and traceability. 


  • By far the most common form of measurement undertaken each day in engineering is coordinate metrology. We use Coordinate Metrology to show you how to dissect any piece of measuring equipment no matter what its output. We show how to break it down into constituent parts and look for individual strengths and weaknesses as well as overall system idiosyncrasies. Whether buying new equipment or evaluating existing equipment, determining system capabilities is a valuable skill for the Metrologist.


Year 2 looks at core metrology tools and how metrology can impact a business. You will learn how metrology planning and assessment can drive continuous improvement and cost efficiency. An awareness is taught of metrology’s place in the wider business drive for productivity. You will comprehensively cover Measurement Systems Analysis (including GR&R studies), and Measurement Uncertainty. With an eye on the future smart metrology and Industry 4.0 is covered. Year 2 culminates and closes the course with a work-based project.


  • As a metrologist you will find yourself making decisions that can severely impact both positively or negatively the company you work for. In this module we will give an insight into key management tools that will support your work, such as project management and lean and agile principles. But also the wider business implications, looking at return on investment and cost/benefit analysis as well as other financial tools that may help any decision making.


  • How do we know if a measurement systems and process is capable? If performed incorrectly or with bias, it gives us bad information that can undermine productivity and quality. MSA is a way of determining the capability of a measurement process, more than just a GR&R it is a tool box of tests, analysis and reports.


  • Measurement technologies and the move towards automation and smart manufacturing is an area of metrology that companies need to be aware of and be prepared for, including an awareness industry 4. This module is a look at in process measurement and an introduction to industry 4. The module is delivered at an industry exemplar site (subject to availability). This is currently held at Renishaw who are a very good example of in-process measurement and control.


  • All measurement is subject to variation. The evaluation of uncertainty is a key tool in calibration but also plays a current and expanding future role in manufacturing measurement. You will learn how to create an uncertainty budget based on accepted international principles. A way of estimating the potential variation without interfering with a running process or when planning a new process.


  • As a final project to finish the degree, you should select a work-based issue or process. Utilising the metrology tools and skills you have gathered over the previous two years, you will provide analysis as to the capability and function of that process, providing conclusions and recommendations for improvement. This project can be a major metrology related project that supports your organisations ambitions for improvement or, if a suitable work-based project is not viable, a desk top study of an area of metrology or measurement technology can be undertaken.


We regularly review our course content, to make it relevant and current for the benefit of our students. For these reasons, course modules may be updated.

How you'll learn

Developed in consultation with Industry and stakeholders, this part-time vocational entry course is a uniquely focused industrial metrology course. The teaching aim is to develop and expand the knowledge of industrial engineers and measurement specialists to optimise metrology within their company.

Lectures are 15 hours per 20 credit module, taught in two day blocks for the six modules per year, for two years. A lecture launches each module, followed by a period of work-based application back in your company. At the end of that module learning period, you are assessed. The employer driven intent of this course is to improve and deepen knowledge, develop work-based application skills and provide benefit to your company as you learn.

The typical lecture is designed for campus attendance with online tools utilised for remote support. The total contact hours are however a combination of face-to-face teaching and online classes/sessions.

In Year One, you will be required on campus for approximately 14 days over the 6 modules. In Year Two, you will be required on campus for approximately 11 days over the 5 modules.


Each 20 credit module will be assessed by coursework against the modules learning outcomes, assessment will utilise a variety of methods, including written reports, case studies, tests and individual and group presentations. The final module is a work-based project where you where applicable can resolve a work-based measurement issue.

The Coventry University Group assessment strategy ensures that our courses are fairly assessed and allows us to monitor student progression towards achieving the intended learning outcomes.

Job ready

Upon successful completion, you will have knowledge of:

  • The foundations of metrology (maths, science and standards)
  • The well-established principles in metrology and the way in which these principles have developed.
  • The main methods of enquiry in metrology and the ability to evaluate the appropriateness of different equipment and approaches to solving problems.
  • Understanding the limits of your knowledge and the resources available to enable further personal development.
  • Industry 4 and its potential impact on metrology.
  • Business tools in relation to Benefit vs Cost and broader tools that integrate to Metrology.

Upon successful completion, you will be able to:

  • Understand the importance of measurement within manufacturing.
  • Access, analyse and use information from a variety of sources to solve measurement problems.
  • Evaluate different approaches to the solution of measurement problems within their organisation.
  • Analyse measurement capability within their organisation and make recommendations for improvement.
  • Locate relevant information (standards, processes and procedures) to enable informed decision making.
  • Use scientific methodologies within your field.
  • Act independently to analyse, plan and implement changes based on verifiable evidence.
  • Develop the vocational skills valued by their employers.

Entry requirements

Typical offer for 2022 entry.

  • At least 40 points on the national tariff in one subject at GCE or VCE A-level (or a VCE double award) or equivalent;
  • At least 60 points on the national tariff in at least one subject at GCE or VCE Advanced Supplementary (‘AS’) level where the student has attempted and has been fully assessed in, but failed to achieve, and A-level; or
  • Those without formal qualifications, but with significant relevant work experience and in appropriate employment.

We recognise a breadth of qualifications, speak to one of our advisers today to find out how we can help you.

Chat with UK admissions

Tuition Fees

We pride ourselves on offering competitive tuition fees which we review on an annual basis and offer a wide range of scholarships to support students with their studies. Course fees are calculated on the basis of what it costs to teach each course and we aim for total financial transparency.

For more information, please visit our Finance pages.

Student Full time Part time
UK Not available £6,450


Factory on the floor

Faculty on the factory floor

AME brings together academia, industry, and research and development in a ‘live’ manufacturing environment. Our partnership with Unipart gives you the opportunity to work with some of the most talented engineering professionals in the UK.

High performance engineering centre

High Performance Engineering Centre (HPEC)

Situated on the ground floor of our Engineering and Computing Building, the centre houses flight and driving simulators, a chassis design assembly and test facility, wind tunnels and a fleet of CNC manufacturing machines.

Metals workshop

Metals Workshop

Participate in technical work in a hands-on way. The workshop includes lathes, milling machines, fabrication equipment for sheet metal work, CNC machines, work benches, welding lines and a fitting assembly area.

Careers and opportunities

In today’s fast-moving and competitive world of business, we believe that developing good metrology practice has never been more important for securing better data, decision making and managing risk.

We believe that metrology plays a vital role in modern life with specialist skills increasingly relied upon in energy, environment, life sciences, automotive, aerospace, defence, government, manufacturing and commerce. Employees working in measurement and calibration across the UK we consider to be responsible for applications including monitoring pollutants in the air, calibrating radiotherapy equipment or ensuring vehicle safety.

We have tried to shape this course in line with the manufacturing engineering industry with the aim of providing students with the skills and expertise needed in this field, and to help attempt to add substantial value to any current or future employer.

Where our graduates work

Previous graduates of the course have included inspectors, quality engineers, quality managers, manufacturing or production engineers, laboratory and measurement technicians and metrologists.

How to apply

  • Student Contract

    By accepting your offer of a place and enrolling with us, a Student Contract will be formed between you and the university. A copy of the 2021/22 Contract can be found here. The Contract details your rights and the obligations you will be bound by during your time as a student and contains the obligations that the university will owe to you. You should read the Contract before you accept an offer of a place and before you enrol at the university.

    Tuition fees

    The tuition fee for the course that is stated on the course webpage and in the prospectus for the first year of study will apply. We will review our tuition fees each year. For UK and EU students, if Parliament permit an increase in tuition fees, we may increase fees for each subsequent year of study in line with any such changes. Note that any increase is expected to be in line with inflation. Following the UK’s exit from the European Union, EU students should be aware that there may be a change to UK laws following the UK’s exit, this may change their student status, their eligibility to study part time, and/or their eligibility for student finance. We will act in accordance with the UK’s laws in force in relation to student tuition fees and finance from time to time.

    For International students the tuition fee that is stated on the course webpage and in the prospectus for the first year of study will apply. We will review our tuition fees each year. For international students, we may increase fees for each subsequent year of study but such increases will be no more than 5% above inflation.


    The majority of our courses have been formally recognised by professional bodies, which means the courses have been reviewed and tested to ensure they reach a set standard. In some instances, studying on an accredited course can give you additional benefits such as exemptions from professional exams (subject to availability, fees may apply). Accreditations, partnerships, exemptions and memberships shall be renewed in accordance with the relevant bodies’ standard review process and subject to the university maintaining the same high standards of course delivery. 


    Facilities mentioned on this page may not be relevant for every course. Due to the ongoing restrictions relating to COVID-19, some facilities (including some teaching and learning spaces) and some non-academic offerings (particularly in relation to international experiences), may vary from those advertised and may have reduced availability or restrictions on their use.

    Placements and study abroad opportunities

    Please note that we are unable to guarantee any placement or study abroad opportunities and that all such opportunities may be subject to additional costs (e.g. travel, visas and accommodation etc.), competitive application, availability and/or meeting any applicable visa requirements. To ensure that you fully understand the requirements in this regard, please contact the International Office for further details if you are an EU or International student.

    Additional costs

    This course may incur additional costs associated with any field trips, placements or work experience, study abroad opportunities or any other opportunity (whether required or optional), which could include (but is not limited to), equipment, materials, bench fees, studio or facilities hire, travel, accommodation and visas).

Discover Uni stats