Optimisable system-level thermal models for power electronic converters


Funder

EPSRC Centre for Power Electronics


Value

£55,248 (total) - £50,167.38 (for Coventry)


Collaborators

Oxford University

Industrial partners

Rolls-Royce & IMV Europe

Project team

Mauro S. Innocente & Daniel J. Rogers (University of Oxford)

3D model of an electronic converter


Project objectives

This project is focused on the design of reliable yet efficient thermal models underpinning an optimal design framework for power electronic converters. Due to the high number of times these models must be evaluated during the optimisation process, they are required to be of low computational cost (so-called ‘optimisable’). These models are intended to be efficient representations of the complex thermal management systems found in real power converters. Accuracy is to be progressively increased by relaxing simplifying assumptions whilst ensuring a reasonable computational cost is maintained. Computational efficiency is required so that it is feasible to embed these models in the optimal design framework of the converter, whilst accuracy is paramount because thermal constraints are typically active and therefore drive the design. In order to assess their accuracy, the optimisable models will be ‘validated’ against computationally intensive simulations performed with commercial software.

Impact statement

Power electronics is a key enabling technology that provides flexibility and controllability in a broad range of electrical energy systems. Increases in the power density of power electronics systems lead to increases in their range of applications. The use of electrical power distribution and actuation in place of hydraulic or pneumatic alternatives has increased in recent years due to their simpler installation, higher accuracy and efficiency, easier control, lower energy costs and maintenance, smaller system mass and complexity, lower noise, and cleaner environment. In this regard, the design of power-dense converters is key. Underpinning their optimal design is the thermal modelling of its components. In fact, our current work shows that the thermal constraints drive the design. This project is aimed at finding out whether a compromise between computational efficiency and accuracy can be found which make the thermal models reliable and the optimisation process practicable. These ‘optimisable’ thermal models can be used as stand-alone pieces of software to investigate the thermal effects of a given design and set of specifications, or they can be embedded into the optimal design framework of the converter as constraints driving the design to investigate the level of power density that can be achieved for those specifications. The latter will also provide insight into the power densities that can be expected over the coming years.

http://www.powerelectronics.ac.uk/research/centre-funded-projects.aspx

 Queen’s Award for Enterprise Logo
University of the year shortlisted
QS Five Star Rating 2023