CLOSE

Campus Map

Working with Coventry University

Working with Coventry University

Coventry University is a diverse and exciting place to work and we share the enthusiasm of our staff and students to be the best at whatever they choose to do. As one of the City’s biggest employers, we offer some impressive benefits for our staff and are committed to delivering the very best opportunities. We have a comprehensive training, personal and professional development programme that provides our employees with the skills to enhance their performance in the workplace and grow in their careers. There are pension schemes, a generous holiday allowance and flexible working opportunities as well as lifestyle benefits including childcare vouchers, discounted membership to the £4 million sports and recreation centre and schemes such as Cycle to Work and the CU Car Share initiative.

View current job vacancies.

LOG IN TO THE COVENTRY UNIVERSITY SITE

Staff portal:

Access the central point of information for all staff across the University

LOG IN TO THE STAFF PORTAL

student portal:

Check your assessments, access solar and get course information.

LOG IN TO THE STUDENT PORTAL

Aerospace Technology BEng (Hons)

OVERVIEW

The aerospace industry has many exciting opportunities from design and construction to maintenance and operations. This course will provide you with the skills and knowledge to pursue these opportunities.

WHY CHOOSE THIS COURSE?

On this course you will be taught the intricacies of aircraft systems, the various types of system failure that can occur and the implications of failure. You will be provided with the vital skills needed to work as an aerospace engineer working for an airline or the military.

You will work on a fantastic suite of Merlin flight simulation equipment. You will see what it is like flying a range of aircraft and understand the cockpit and instrumentation. By wearing a special helmet, you will be able to see the environment whilst you are flying, even above your head or between your feet.

If you choose this course you will benefit from:

  • Accreditation by the Royal Aeronautical Society (RAeS). Up-to-date information can be found on the Coventry University and Royal Aeronautical Society (RAeS) websites;
  • Staff with industrial and research experience in a variety of disciplines such as aerodynamics, flight dynamics and avionics, who bring this into their teaching;
  • Previous students have obtained jobs in the military as pilots and engineers, as systems design engineers (Marshalls of Cambridge and Rolls Royce in Derby), and engineers in various aspects of the aerospace industry with companies such as Meggitt, Goodrich, Moog, and HS Marstons;
  • International opportunities, e.g. some of our current students are working overseas at Airbus in France and Berntrandt in Germany.

        Accreditation

        

*Accreditations shall be renewed in accordance with the accreditors standard review process and subject to the University maintaining the same high standards of course delivery.

WHAT WILL I LEARN?

Course structure and module list

This course is regularly reviewed and updated to reflect new developments and the requirements of the profession and industry. Subjects taught include:

 

Year 1

  • Aircraft Principles & Practice
  • Aerospace Engineering Mathematics
  • Mechanical Science Fundamentals
  • Electrical Engineering
  • Aeronautical Engineering
  • Professional Skills
  • ACU Module

 

  

Year 2

  • Aerospace Manufacturing, Materials and Management
  • Human Factors in Aerospace
  • Avionics and Instrumentation
  • Aerospace Technology
  • Aircraft Maintenance Engineering
  • CAD/CAM
  • ACU Module
  • Professional Training

 

 

Optional placement or study abroad year

 

 

Final year

  • Aerospace Applications
  • Individual Project
  • Aerospace Control Systems
  • Aerospace Technology
  • Aerospace Industry Studies
  • ACU Module

HOW WILL THIS COURSE BE TAUGHT?

Your course will be based on a series of lectures, with associated seminars and practical workshop classes. In addition, your personal tutor will review and discuss your progress with you and will be available for advice.

You will work with staff on real-world problems from industry, commerce and research groups, as you would in professional practice; this means that you develop all of the professional skills at the same time as you learn the technical content of your degree.

HOW WILL I BE ASSESSED?

An estimated percentage breakdown of how your final grade is assessed is as follows: formal examinations 30%; coursework, tests, essays 25%; practical or project work 25%; group work etc.15%; presentations, posters etc.5%.

TEACHING CONTACT HOURS

In a typical week you will have up to 20 contact hours of teaching and this will break down as:

Personal tutorial/small group teaching: 5 hours of tutorials each week

Medium group teaching: 5 hours of practical classes, workshops or seminars each week

Large group teaching: 10 hours of lectures each week

Personal study: 20 hours each week of studying and revising in your own time

Entry Requirements

5 GCSEs at grade A*-C including English Language and Mathematics, or specified equivalents.

Typical Offers

A-Levels: BBC to include one from Electronics, Engineering, Mathematics, Physics, ICT or Design Technology. Excludes General Studies

BTEC Level 3 Extended Diploma: DMM in Engineering

Access: The Access Diploma to include 25 Level 3 credits in Mathematics or Physical Science units. Access applicants can meet the GCSE requirements through their current studies and do not need to have these qualifications separately.

International Baccalaureate Diploma: 29 points to include either Mathematics, Physics, Design Technology or IT at Higher Level

Find out more about acceptable equivalent qualifications here.

English as a Foreign Language: IELTS 6.0

How will this course enhance my career prospects?

The course aims to produce graduates with the skills to become successful engineers and engineering managers, both in aerospace and the wider engineering context.

Previous graduates have gone on to become aircraft engineering officers (both military and civil), design engineers, quality engineers and engineering managers for a wide variety of companies. Students have also become pilots and worked in the whole spectrum of aerospace careers.

NO HIDDEN EXTRAS

Included in the fees:

Tuition fee waiver for placement and study abroad year;
Specified core textbooks;
Any mandatory UK residential field trips;
Any mandatory UK site visits and trips;
1,000 sides of black and white laser prints;
Initial set of safety clothing

Additional costs not included in the fees:

Any optional overseas field trips or visits: £400+ per trip;
Optional personal computer and software: £500+;
Optional flying lessons and private pilot’s licence: £7000+


This will be updated with more specific information on the books and equipment you will receive as soon as it becomes available.

Find out more about No Hidden Extras here.

ADD+VANTAGE

The focus on preparing students for successful futures sets Coventry apart as a university. The key: developing and enhancing students' employability––and delivering a serious competitive advantage in the jobs market. At Coventry, that starts right from the beginning.

The Add+vantage modules teach a range of work experience and extra-curricular activities that are taken each year, and which broaden students knowledge and skills within a work focused environment. There is a very broad range of Add+vantage free-choice subject areas, and they are arranged in themes.

Click here for further details

OPPORTUNITIES FOR AN INTERNATIONAL EXPERIENCE

The Faculty of Engineering and Computing has links with many universities around the world.

To increase your employment prospects after graduation we encourage you to study abroad as part of your degree. We will support you in finding a placement anywhere in the world and in seeking financing for that experience. Placements are currently primarily available in Europe (through the Erasmus scheme), America or Asia.

GLOBAL LEADERS PROGRAMME

To prepare students for the challenges of the global employment market and to strengthen and develop their broader personal and professional skills Coventry University has developed a unique Global Leaders Programme.

The objectives of the programme, in which postgraduate and eligible undergraduate students can participate, is to provide practical career workshops and enable participants to experience different business cultures.

Click here for further details.

Graduate Profile – Andy Bowen

I had a great time at CU! A brilliant social life and a well-organised course ended with full-time employment. Perfect!

 

 

APPLY FOR THIS COURSE ORDER A PROSPECTUS
Course code:
H402
Duration:
  • 3 years full-time, 4 years sandwich or study abroad

Qualification:
  • Undergraduate Degree
  • Professionally Accredited Programmes

Course type:
  • Full time
  • Sandwich course

Fees:
£9,000

Contact Details:

Recruitment and Admissions Office

+44 (0) 24 7615 2222